This Self Supporting Brass Full Mounted Folding Table Hinge is ideal for furniture assembly, particularly for cabinets with a drop down flap.
This is designed to sit flush, but obviously you will have to consider wood thickness before fitting.
This is a brass fixing and is available in four finishes; Burnished, Polished Nickel, Matt Brass, Polished Brass
Measurements: Length: 65mm, Width: 30mm
The screw holes are 5mm. Now this hinge does not come complete with screws, but Hospa Wood Screws can be purchased separately: Hospa Wood Screws
- Written by Jack
Please note: Images shown are that of the manufacturer and are for demonstration purposes only. Please check the item details and datasheet for an accurate description of the product.
Please contact us prior to purchase if you are in any doubt about product contents or suitability.
Hi, guys. My name's Darrel and I'm head of the tech team here at LocksOnline. Thanks for taking some time to tune in and have a quick look at one of our product review videos. Now I'm putting these short little videos together to be able to give you, our customers, the opportunity to see the products in the flesh, so to speak, to be able to give you a bit more informed information as to what the product is capable of doing and what its basic application is.
Today I want to talk to you about a nice quality flap hinge that we have on our website and of course, these are designed as self-supporting hinges for the likes of bureau desks or some sort of hatch where you need to be able to open it up and therefore then this hinge is designed to support the weight of the desk mount itself, etc. It comes as standard with three screws for either side. Now the screw fixings don't come with these guys. You need to consider the brass screws that you'll want depending on the thickness that you need and the length that you need. But the idea is, and I don't know if you can zoom in there enough for us, but when the actual hinge then is closed down into its closed position there, this particular part of the hinge here rests against each other to give it the innate strength that this particular type of flap hinge is designed to be used for.
Now this particular hinge here, and I don't know if you can see on the back here as well, and obviously I can show you the front as well, this particular hinge's overall length is 65 millimetres. Its width there is 30 millimetres. The size of one of the leafs, if I was to measure that there, it would give you some sort of idea, if I can measure just to the centre there, you're looking at around about 34 millimetres to the end of the leaf there, to give you some sort of idea. The size of the holes as well, because you'll need to get some screw fixings there, the actual size of the hole there is 5 millimetres and, of course, they're designed to take countersunk brass screw.
So there you go. It's in a bit of a satin finish there on the front and on the back then, it's not so much finished for obvious reasons. But if you need a bit more information on this or any of the products that we have, by all means, pop us over an email, use the live chat that we have, or simply pick up the phone and give us a call. I'm hoping that this little video will be able to give you that little bit more extra info. But if you need to speak to us, like I said, pop us over a call. So from me, Darrel, and all of us here at the LocksOnline team, thanks for taking the time and we'll catch up with you real soon. Take care. Bye-bye now.