Customer Service
Customer Service

LocksOnline has been trading online for 22 years!

Loox 12V LED Black Constant Voltage Driver

  • From Only: £33.42 £29.91 + VAT

This Loox LED Black Constant Voltage Driver is for use with Loox 12V lights only.  Mains lead needs to be ordered separately.  This driver has: - 6 sockets for 12V lights; 4 on the front, 2 on the side (Please be aware of voltage as you increase the amount of lights) - 1 socket for a switch; A single socket on the side of the driver -... Read more »

Scroll down for options, pricing & availability!

Ask a Question View Specs BUY NOW

Product Name Stock Price Tap in Req. Qty
Length x width x height: 208 x 56.5 x 30 mm; Wattage: 0-60W - Black (1 Piece)
£33.42 + VAT
£29.91 + VAT
(£35.89 inc VAT)
Length x width x height: 140 x 43 x 20 mm; Wattage: 0.5-15W - Black ()
- - - -
Length x width x height: 195 x 43 x 28 mm; Wattage: 0.5-30W - Black ()
- - - -
Length x width x height: 128 x 50.5 x 14 mm (flat); Wattage: 0-20W - Black ()
- - - -
Moulded plug; 2000 mm (1 Piece)
£4.03 + VAT
(£4.84 inc VAT)

This Loox LED Black Constant Voltage Driver is for use with Loox 12V lights only.  Mains lead needs to be ordered separately. 

This driver has:
- 6 sockets for 12V lights; 4 on the front, 2 on the side (Please be aware of voltage as you increase the amount of lights)
- 1 socket for a switch; A single socket on the side of the driver
- 1 socket for a country-specific mains lead
The lights, mains lead and switch would need to be purchased separately from the driver.

The 12V driver does come with an IP20 rating which means it's protected from touch by fingers and objects greater than 12mm but it's not protected from liquids. If you are installing LEDs in a bathroom or any wet areas, the driver will need to be housed somewhere secure and dry. We'd recommend consulting with an electrician first.

Input Voltage: 100 - 240V; 50 - 60Hz. Output Voltage: DC 12V

The driver is black plastic and fixings are included.

Please feel free to browse through our range of 12V lighting.
These are 2 examples from our popular 12V range:
Loox Compatible 12V LED Sunny 3D Downlight with Intergrated Snesor Switch
Loox Compatible 12V LED Square Spotlight
- Written by Jack


Please note: Images shown are that of the manufacturer and are for demonstration purposes only. Please check the item details and datasheet for an accurate description of the product.
Please contact us prior to purchase if you are in any doubt about product contents or suitability.


Main photo of Loox 12V LED Black Constant Voltage Driver

Loox 12V LED Black Constant Voltage Driver

Hi, guys. My name is Darrel and I'm head of the tech team here at Thanks for taking some time to tune in and have a look at one of our product review videos.
Now it's really exciting news for us because we've now started to put a whole range of LED lighting on our website which is really, really good news for our customers, especially for our architectural ironmongery range on So I wanted go through all the different types of light fittings that we have. And the one that I have here in front of me at this moment in time is the square type of LED light fitting that I have.
And here is the actual fitting itself. Now it's available in two different types of lights. It's available in a warm white colour or a bright white colour they call a cool white. This actual fitting here is actually is actually push-fitted. And I know if you can zoom in there for us but we can actually show them the actual fittings here. So you would need to cut yourself a 68mm hole and then what you will do is this would actually be pushed up into the fitting like that and held into place by these two little clamps on either side there. I don't think you can get in on the detail on that.
Now this cover plate can come off. It's pushed in there. If I was to try and get that out there a little bit. Here you go. Okay so you can actually press-fit those in, all right, like that. And this is the actual LED fitting there like that there, and then this could actually be fitted on the top over it then after if you want to do so.
Now the actual size of the hole, as I mentioned before, it needs to be 68mm in diameter and is pushed up into the hole. And it should sit there under its own spring clips to keep it fixed nice and tidy. It comes with a 2.5m lead so it allows you a lot of flexibility in respect to that. Now with these you need a transformer in which to work for these. All right. I've actually plugged in a transformer here, and as you can see it's got some connections on the side here. Two connections on the side there and then it's got a further four connections on the other side here as well.
Now with these range of LED lights and so forth, you can also, which I'll show you in a minute, you can fit a switch on the side there. I don't know if you can zoom in on that. There's a little connection on the side there that allows you then to plug a switch in. And that will allow you then a small little switch to be able to switch them on and off. Of course, alternatively, you could actually switch the mains on and off to switch the lights and not necessarily have the switch.
So what I'm going to do is I'm to clip this back together now and we'll try and fit this all back together. Just push that in there like that. Clip that in there like that. There you go. There you go. So that's back in the fitting. Now these connectors here on the end, these actually fit into here. And of course, as I've mentioned, you've got four across the front and two. That's up to six of these can be fitted in there and I'll just get that into there like that. Okay. And there you go. We've just put that up in because we've already got that plugged on and there's the light there, all nice and bright.
Now of course, as I've said, you can either switch it with the mains or we have these little light switches here. So if I just put this down. And this again is designed to be a little push-switch like that, and you could drill yourself a hole, sorry, in wherever you want this to be fitted. Let me get the measurement on that for you to give you an idea of the size of the hole that you'll need. Okay, so there's the size there. It's 11, just about 11.5mm there. And then you push in that there. So it's probably 11mm is what you need to be drilling a hole in. And this would actually fit then into the side of the actual transformer like that. Okay. And this now allows us then on this lead here to switch the light on and off. There you go.
Now of course you can have up to six of these then dotted around underneath your units or wherever you decide you want them per transformer. And then of course, if you need more, you'd buy yourself another transformer, another lead. And then of course then, if you want to have a switch as well to switch it on and off. So this is the square light, 74mm across the whole width of that square. Available now on Locks If you need a bit more information, I mean, they are quite straightforward. It's all plug and play. There are no gadgets required or technical gadgetry to get this all to work. It's all pretty standard. You need a couple of drill bits and a drill to get it all nice and tidily installed.
But if you need a bit more information or a bit more advice, by all means pop online. Use our live chat that we have on our website. It's totally free. You can speak to me or any of the guys on the LocksOnline tech team and they are there to help you out. So in the mean time, thanks for taking the time to take a look at this video and I hope it gives you a little bit more explanation on how this actually works and we'll catch with you real soon. So take care. Bye-bye now. Bye-bye.

Ask a question about this product

** Please ensure you have checked the product description and previous Q&A's to see if your question has already been answered! **

Write a review

Note: HTML is not translated!
    Bad           Good

The LocksOnline Team


Head of the tech team, and locksmith of 25+ years


Specialises in Ironmongery & Door Furnishing


Deals with Sales on the website


Deals with Sales on the .com website


Ensures day-to-day logistics run smoothly


Keeps our workshop running smoothly


Our web developer and content manager

Close the chat box

We will phone you - Request a call back