Want to discreetly and conveniently have your bins tucked away neatly in a cupboard unit?
This pull-put waste bin unit makes light work of waste disposal, by means of a beautifully smooth pull-out runner system, for easily sliding your bins in and out of the cupboard for quick and effortless access, whilst also providing you with an easy solution to making sure the rest of the family separate the general waste from the recycling!
These are designed for side-hinged doors that open to a 90 degree angle, that will not interfere with the operation of the pull-out unit.
As you will see, the operation is very straight forward; you would simply pull the bins out, the lid remains inside the unit allowing free access to dispose of your waste, and then simply glide the bins back into the unit, and it will then be covered by the lid once again, and you'd then close your doors keeping the bins nicely concealed within the cupboard.
It is very simple to install, just a simple case of four fixing screws into the base of your cabinet, this really couldn't be more easy! It comes fully assembled so all you need to do is screw it down into your cabinet, pop the lid on, and away you go!
The technical stuff:
- The complete unit sizes up at 430mm Wide, 455mm high, and 465mm deep. So you need to make sure your cupboard will accomodate this!
- The bins included are one 30 litre bin and one 19 litre bin, totalling a 49 litre bin capacity between the two.
- Written by Jack
Please note: Images shown are that of the manufacturer and are for demonstration purposes only. Please check the item details for an accurate description of the product.
Please contact us prior to purchase if you are in any doubt about product contents or suitability.
Hi, guys. My name is Darrel and I am the head of the tech team here at LocksOnline. Thanks for taking the time to tune in and have a quick look at one of our product review videos. Now we put these short little videos together to be able to give you, our customers, the opportunity to see the product that we have to offer in perhaps a little more detail than what an image and a bit of descriptive text may offer. Of course, it allows you to see the product in the flesh, so to speak, and therefore then help you make a more informed decision.
Now today I want to show you one of the of inset ranges of Halo Bin Systems that we have on our website. It's quite a simple unit. It's actually designed to sit inside a kitchen worktop or a kitchen cupboard, etc., so you'll effectively open the cupboard or open the cupboard that way and allow you then to be able to pull out your waste bins from within the actual assembly as you can see it here.
Now this is a double bin system so I am going to need to put a weight on the back of it but as it actually pulls out there I can pull it out all the way there and actually slide it forward slightly. And there you can see that then you could drop your waste in. It's got two cubicles there, one slightly larger than the other. The measurements and so forth are on our site but it's the idea is that you could then use one as a recycling and one then for general waste perhaps. And then simply you would slide that back in there like that. Therefore then you would then close your cupboard onto it and that would be it that would be the extent of it.
It's designed to actually be bolted within the base of the actual kitchen unit itself. The bins themselves are able to be taken out quite easily. I can lift them out there, no problem at all, and of course the one at the back as well. The actual lid as well, this particular part on the top here, this can be physically lifted off as well if you needed to get in and give it all a good clean to keep it all nice and sanitary safe.
Now the actual assembly itself, if I can turn this around on its side, to give you some sort of indication as to what it looks like from the side. You may be able to see here, if I was to bring it more this way perhaps, you might be able to see in there the screw fixings that are in there and those would actually be bolted down into the floor.
I've got a tape measure in my hand so I'm just going to give our customers a bit of an idea of the overall measurements of this particular unit. Just to give you some sort of . . . I know the details are on the page but you've got the back depth there of 455 mm. It's a little bit more if you actually push the drawer in there a little bit. That gives you then 470 mm. The actual height of the actual unit itself sitting on the base there is 455 mm from the top to the bottom. The actual bracketry here just to give you some sort of idea that there is 357 mm and then the width of the actual unit itself, I'm measuring from the back here, it's just over 432 mm.
So there you go, guys. That's just one of a range of products that we have on our site. We got loads and loads and loads of different products but if you need a bit more information on this or any of the products that we have, by all means, pop us over an email. Use the live chat that we have or simply do it the old-fashioned way and pick up the phone and give us a call. Either way, we'd love to hear from you and more importantly, we'd love to see you as one of our customers. So from me, Darrel, and all of us at the team, thank you for taking the time to tune in and we'll catch up with you real soon. Take care. Bye-bye now.