This Screw-In Sleeve is ideal for anyone designing a piece of wooden furniture or requiring extra fixings.
This is suitable for a 12mm diameter hole and has a hexagon socket head and rim.
Zinc Plated Steel
Available in 4 lengths: 15mm, 17mm, 20mm, 24mm
- Written by Jack
Please note: Images shown are that of the manufacturer and are for demonstration purposes only. Please check the item details and datasheet for an accurate description of the product.
Please contact us prior to purchase if you are in any doubt about product contents or suitability.
Hi, guys. My name is Darrel and I'm head of the tech team here at LocksOnline. Thanks for taking the time to tune in and have a quick look at one of our product review videos. Now we've put these short, little videos together to be able to give you, our customers, the opportunity to see the products that we have to offer, in perhaps a little bit more detail than you may expect from just an image or a bit of descriptive text.
Today I want to talk to you about some sleeves. We've got some screw-in sleeves that we have, to allow you to be able to fix Airmate bolts to a carbonate housing or something similar. Obviously designed to work with chip boards or MDFs, etc. The idea would be, is that you drill yourself a hole and you would then use an Allen key here. There shape there has got an Allen key slot. I don't know if you can zoom in close enough to see that. And the idea is that once you've drilled your hole, you ratchet back into position, and that would then allow you to be able to screw an Airmate bolt into there. And because of the course thread on here, obviously it's going to hold well into the chip board or the MDF.
Now, there's not really much that we can say in regards to more about it, other than what its application is, which you've already had a talk about. But what I can do, is I can give you guys some sort of idea of measurements there. The overall length of that there is 20 millimetres. The actual size of the thread that you'd be looking at wanting to cut there, is round about the nine and a half millimetres. That's probably the size of the hole that you wanted to drill. Therefore, the projection, the fattest part after you cut the thread, etc., is right around 12 millimetres there. So you're probably looking at something in the region of between a 9 1/2 - 10 millimetre hole. Obviously inside there then, is the thread deep in there to allow you to bolt up.
So, there you go, guys. That's one of the products that we have on our website. But if you need a bit more information or you want a bit more advice on this or any of the products we have going, by all means, pop us over an email, use the live chat that we have, or simply pick up the phone and give us a call. Either way, we'd love to hear from you and more importantly, we'd love to see you as a customer. So from me Darrel, and all of us at the team, take care and we'll catch you real soon. Bye, bye.