This 140 degree pivot hinge, without stop is designed to work in conjunction with flush mounted doors, with a thickness of 12 to 21mm
Made from plastic and available in brown, black or white.
For press-fitting and one pair required per mounting.
Maximum door opening angle of 140 degrees.
These are detachable
- Written by Jack
Please note: Images shown are that of the manufacturer and are for demonstration purposes only. Please check the item details and datasheet for an accurate description of the product.
Please contact us prior to purchase if you are in any doubt about product contents or suitability.
Hi guys, my name is Darrel, and I'm head of the tech team here at LocksOnline.co.uk. Thanks for taking some time to tune in and have a quick look at one of our product review videos. Now we're putting these short little videos together to be able to give you, our customers, the opportunity to see the products that we have to offer in a little bit more detail.
Today I want to talk to you about a cabinet concealed door hinge that we have on our site. It's sold as a set, as a pair. One to go at the top of the door and one to go at the bottom of the door. So if you can imagine you've got yourself some cabinet doors, I mean like a display cabinet, etc., you might not necessarily want to have an exposed hinge so therefore then everybody can see it. You may want to hide the hinges at the top and at the bottom and maybe this is the type that you might be looking at wanting to have.
Now the idea is that this particular part here would actually be recessed into the carcass. One at the top up there at the top of the carcass, one at the bottom down there. Now this part here is the part that you would actually insert into the door. Now you may notice that there is a groove sitting on here and what we would recommend is that you, on the inside of the door that you can't see, is cut yourself a groove to allow you then if ever need. I don't know if you can zoom in there with enough detail, that when I actually lift that up there like that, there may come a time that if you need to take the door off then you might need to get a screwdriver in there and lift that up to allow you then to take the hinge out so that's quite important the door off the actual carcass. So, just a few top tips there.
So, the idea there is that one you've actually fitted that into the frame at the bottom and one at the top, these are in the actual door ready to go. The idea is that you'd push those in that would then slide and drop into there and similar then you would have another one then sitting at the top there like that and that would be your door. So that's the basic principle of how they would actually work.
So very, very quickly what I will do is I will get some very basic measurements for you. There is a detailed specification on our site. But while you're here watching the video the overall length of these is 30 millimetres. The actual thickness of the size hole you will be wanting to drill is 6.8 millimetres so probably about a 6.5-millimetre hole. A 7-millimetre hole probably need to put a little bit of glue or whatever in there just to hold it into place. The actual size of the plate here, the fixing plate, the actual thickness of the hole you need to drill there is probably around a 12 or 11-millimetre hole.
Like I said, the exact specifications are on our site. And then you've got the whole length of this particular hinge here is 35 millimetres. The actual size of the pin. That's quite important perhaps. That size there is just around the 4 millimetres that's the thickness of the actual hinge as well.
So there you go, spring loaded as I mentioned. So you spring them in, clip them in, they bounce then into position and then therefore there's your door swinging on the hinge no problem at all. But like I said, top tip, cut a little groove in the backs that allow you to take them out at any time you may need to do so.
So there you go guys. That's just one of the products that we have on our website. But listen if you need a bit more information on this or any of the products we have, pop us over an email, use the live chat, or simply do it the old fashion way and give us a call. Either way we'd love to hear from you and more importantly, we'd love to see you as a customer.
So from me, Darrel, and all of us on the team, thanks for taking the time to tune in and we'll catch up with you real soon. Take care now.