Customer Service
Customer Service

LocksOnline is still open for business! Click for more info!

Flush Fitting Inset Handle for Cabinets & Sliding Doors, 110 x 56 mm


  • From Only: £6.77 £6.39 + VAT

These inset handles are designed to be virtually flush-fitting, where projecting handles or knobs are not suitable or desired for the application. This is most commonly on drawer or cupboard units where free space is minimal and therefore maximising on the usable space is of utmost importance, or even moreso on sliding door systems such as the ever... Read more »


Scroll down for options, pricing & availability!


Ask a Question View Specs BUY NOW

Product Name Stock Price Tap in Req. Qty
Finish: Matt chrome (1 Piece)
Loading...
£7.76 + VAT
(£9.31 inc VAT)
Finish: Matt nickel-plated (1 Piece)
- SPECIAL OFFER : NOW WITH 6% OFF!
Loading...
£6.77 + VAT
£6.39 + VAT
(£7.67 inc VAT)

These inset handles are designed to be virtually flush-fitting, where projecting handles or knobs are not suitable or desired for the application.

This is most commonly on drawer or cupboard units where free space is minimal and therefore maximising on the usable space is of utmost importance, or even moreso on sliding door systems such as the ever more popular 'pocket' door systems which are on the rise.

These particular handles are designed to be fitted by means of screw-fixings from the back / inside of the unit, or can also be fitted by means of 'harpoon' fitting, meaning you can simply push them into a recess hole, and the handles will be fixed in by means of a serrated top and bottom grip on the recessed part of the handle.

Screws are not included with these as it depends entirely on the thickness of the unit panel you're fitting them to, and also because they don't require screw fitting due to the harpoon fitting ability.
- Written by Jack

 

Please note: Images shown are that of the manufacturer and are for demonstration purposes only. Please check the item details and datasheet for an accurate description of the product.
Please contact us prior to purchase if you are in any doubt about product contents or suitability.

 

Main photo of Flush Fitting Inset Handle for Cabinets & Sliding Doors, 110 x 56 mm

Flush Fitting Inset Handle for Cabinets & Sliding Doors, 110 x 56 mm


Hi, guys. My name is Darrel and I'm head of the tech team here at LocksOnline. Thanks for taking some time to tune in and have a quick look at one of our product review videos. Now we're putting these short little videos together to be able to give you, our customer, the opportunity to see the products that we have to offer in perhaps a little bit more detail than in the stock image or a bit of descriptive text may give. Today I want to talk to you about an inset handle that we have on our website. It's actually quite a nice mature sort of product really. It's obviously designed for a sliding door or perhaps a cabinet or a cupboard or even a drawer perhaps.
The idea is that once you fit it, you would be able to put your hands in here and be able to pull open the cupboard, the drawer, or perhaps if you had it on a pocket sliding door systems, then you would be able to pull the door towards you back and forth like that. So, it has quite a few different multiple choices of use, etc. Now the fixings on these is a twofold sort of style of fixing. You can either have what they call in the industry a harpoon fixing, in other words you would cut the shape of the hole and then these serrations on the side here on either side you would be able to push it in and put it into place by forcing it in against these rubber stops.
Or alternatively, you do have screw fixings there so you can screw from the other side if you need to do so. Now this particular one comes in this lovely satin finish there as you can see. It can actually break apart into two sections so when you're going to fit these, etc., it allows you to play with the two sections there as you can see.
What I'll do now is quite important in these particular type of fittings is we need to get some accurate measurements because when you start cutting into timber you want to make sure that, you know, it's not going to end up cutting out too far, etc. So the measurements are specific on our website but while I'm here I'll give you just a few quick ones here. So from there to there we've got a measurement there of a 104mm and then the height there of the metal itself is 50mm there.
Now it's depth if I was to pop out on the side there like that, you'd probably could get this better than me. If you have a look at that there you see the depth there of the actual top counter unit there, if that gives you some sort of idea as to how deep you need to go in. So what you would also do as well while I'm here if you do want to screw fixing let me get some fixing centres for you just in case. I'm talking you would want to give a millimetre to two depending on the accuracy there, we're talking about 96 millimetres fixing centres there. So when you go to use this as you can see I can get basically all my forefingers in here quite easily to be able to pull or slide this particular inset handle.
So there you go, guys. There's not much more that I can say but if you need a bit more information on this or any of the products that we have, by all means, pop us over an email, use the live chat that we have, or simply give us a call. Either way, we'd love to hear from you. More importantly, we would love to see you as a customer. So from me, Darrel, and all of us here at the team, thanks for taking the time to tune in, and we'll catch up with you real soon. Take care and bye-bye now.

Ask a question about this product

** Please ensure you have checked the product description and previous Q&A's to see if your question has already been answered! **


Related Products / Don't Forget to Order

Packs of M4 Flat Head Handle Screws

Packs of M4 Flat Head Handle Screws

• Flat head• Zinc-plated steel• *45 and 50 mm lengths with 35 mm thread lengths..

Prices From: £0.81

M4 Snap Off Adjustable Wood Screws - 10mm Diameter - Flat Head

M4 Snap Off Adjustable Wood Screws - 10mm Diameter - Flat Head

• Yellow chromatized steel flat head M4 screw, length 45 mm• Due to segmentation, screw can be broke..

Prices From: £3.82

Inset handle,  96 mm hole centres

Inset handle, 96 mm hole centres

• Zinc alloy• Screws not included, please see Fixing Materials..

Prices From: £5.59

Inset handle, 111 x 41 mm

Inset handle, 111 x 41 mm

• Zinc alloy• Screws not included, please see Fixing Materials..

Prices From: £5.21

Inset handle,  44 x 44 mm, ø 38 mm

Inset handle, 44 x 44 mm, ø 38 mm

• Brass• Screws not included, please see Fixing Materials..

Prices From: £1.25

The LocksOnline Team


Darrel

Head of the tech team, and locksmith of 25+ years


Eve

Specialises in Ironmongery & Door Furnishing


Lesley

Deals with Sales on the .co.uk website


Nicola

Deals with Sales on the .com website


Ann

Ensures day-to-day logistics run smoothly


Bryn

Keeps our workshop running smoothly


Jack

Our web developer and content manager

Close the chat box


We will phone you - Request a call back