This Intergrato Adjustable Universal Castor Foot is ideal for anyone needing to adjust and align their heavy duty furniture.
Suitable for use with heavy duty wardrobes, bookcases and modular furniture, with a maximum load carrying capacity of 175kg per foot. Available with a 25mm adjustment.
- Plate comes with built-in spikes, which are designed to be hammered along the bottom edge of the cabinet, then secured in to position with countersunk 18mm length screw from underneath. 2 x 18mm panhead screws can also be screwed from the side if required.
- 8mm diameter through hole in the base of the cabinet allows for adjustment to the leveller from above, by using a SW6 hex key. A cross and blade screwdriver can also be used.
Note: Screws will need to be purchased separately:
Countersunk: Countersunk Screws
Panhead: Panhead Screws
Made from zinc alloy and comes complete with an independant black plastic glide, designed to prevent floor scratching
- Written by Jack
Please note: Images shown are that of the manufacturer and are for demonstration purposes only. Please check the item details and datasheet for an accurate description of the product.
Please contact us prior to purchase if you are in any doubt about product contents or suitability.
Hi, guys. My name is Darrel and I'm head of the tech team here at LocksOnline. Thanks for taking some time to tune in and have a quick look at one of our product review videos. Now we're putting these short little videos together to be able to give you, our customers, the opportunity to see the products that we have to offer in hopefully a little bit more detail and help you make a bit better of an informed decision.
Today I want to show you an adjustable foot that we have on our website. It's manufactured by the company Integrato. The idea is quite straightforward. It sits outside of a cabinet or inside if you've got a carcass where you can actually get at the inside. The idea is that this particular part would be screwed in underneath the base. There's a screw fitting there that sits underneath there. These actual disks then would bed themselves into the fabric of the carcass itself.
You also have an additional screw fitting that can go here and also on this side as well. So there's a significant amount of strength that could be held there by the by those particular type of screw fittings. Then you have the ability then to be able to adjust this foot depending on what length you want it. The exact specifications and measurements are actually on the website, so by all means, have a quick read through those.
But to be able to show you in here as well, I don't know if you can zoom in there, but you'll be able to see there you can put a flat or a Philips head or Pozidrive head in there to allow you to screw and adjust this particular base to suit the particular application to make sure that all your units are horizontal, etc. This particular part here swivels on its own situation there, so therefore then it allows you to screw down without this base trying to twist against the floor as well. So you have the ability to make a reasonable amount of adjustment there.
So there you go, guys. There's not really much to say about it in the grand scheme of things but it does allow you to be able to see it in the flesh and therefore then hopefully say that's just absolutely ideal that's what I'm looking for and hopefully you'll become a customer of ours and buy a few off us.
But listen, if you need a bit more information on this or any of our products, by all means, pop online, use the live chat, give us a call or pop us over an email. Either way, we'd love to hear from you and as mentioned we'd love to see you as one of our customers. So from me, Darrel, and all of us at the team, thanks for taking the time to tune in and I hope we catch up with you real soon. Take care, bye-bye.