This pull-out tie rack is designed for installation in wardrobes, to act as an addition to your wardrobe rail in order to store and view your range of ties without having clothes in the way.
These are designed to hold up to 32 ties - but of course if you're a tie enthusiast with even more than 32 ties, you can double-up and have one on each side of your wardrobe!
These are extremely simple to install, a simple four-screw fixing into the wardrobe wall, and can be done in just minutes with the screws provided!
For Wall Mounting: You will need a wardrobe with a minimum depth of around 510 mm in order to neatly accomodate the rack.
For Door-Mounting: Your doors will need to be 510mm wide or more!
Once installed, you would simply pull on the finger-pull loop seen on the outer end of the tie rail, and this will extend the rail out, allowing you to freely view your ties without interference from the rest of your wardrobe!
- Size: 82mm High x 76mm Wide x 505 mm Long
- Maximum Extension: 380 mm
- Materials: Anodised Aluminium & Plastic
- Written by Jack
Please note: Images shown are that of the manufacturer and are for demonstration purposes only. Please check the item details and datasheet for an accurate description of the product.
Please contact us prior to purchase if you are in any doubt about product contents or suitability.
Hi, guys. My name is Darrel and I'm head of the tech team here at LocksOnline. Thanks for taking some time to tune in for a quick look of one of our product review videos. Now we've put these short, little videos together to be able to give you, our customers, the opportunity to see the products that we have to offer perhaps in a little bit more detailed than you would probably get from an image or a bit of descriptive text that's on our website.
Today I want to talk to you about this quite stunning little tie rack that's designed to sit inside a wardrobe, et cetera, so if you had problems as to where you can hang your ties for us gents et cetera, then maybe this is the product that you've been looking for. Now the idea is quite straightforward and it's very, very simple. This particular design here allows you to have to fit it to ties and you can just rest them over here and sit them down. We've got these little upstands there on the side there to stop the tie falling off, et cetera.
So the idea would be if this is the front of the wardrobe here, this would be screwed into the wardrobe onto the side of the wall or the panel of the actual wardrobe like that, and then what I would do is I would then pull out, open the door, pull that out, and that will allow me then to look at all the ties, so if I was to turn it around to you perhaps, and if that was now tied to the wall here so it was more of a left hand in operation there like that, when the door is closed, that would be in there like that, this will be the door so you'll open the door like that, pull on this here like that and then that will allow you then to be able to choose the tie that you're looking for.
Now it comes with some screw fixings as well, to allow you sit it on to the side there so that's the basic principle of it. What I'll do quickly is that I'll get some measurements so if you think, [wow] that's just what ideal, that's what I'm looking for, let's get some measurements to make sure it will fit in your wardrobe. So the overall length, I'll just use a standard measuring tape here. So the overall length there, you're going to be looking at probably you're going to be needing at least about 500 mil of distance there from there to there, maybe give yourself a little bit more because the actual handle there comes actual to around 520 so if I was to pop this on this side here like that and you were to zoom in on the outside, just down here somewhere, that gives you some sort of idea there as to where you're thinking there. This is 520 there where my thumb is there. So you need to get be getting a little bit of distance there as well.
Now, the actual part I actually fixes to the side of the panel there, you can see that it's got four screw fixings. So what I'll do very, very quickly is I'll just get a measurement of that as well so I can give you some sort of idea what size of the bases. We're looking there right about 95 millimetres and then the width of that there is about 18 millimetres there. And those fixing centres there just to quickly get those for you there, they're going to be about 63 millimetres. I'll get those fixing centres there as well for you and they're 65 millimetres.
So there you go, guys, exciting product, got a satin anodized aluminium finish and these support themselves are plastic derivatives. So if you need a bit more information on this and any other products we have, by all means, pop over an email, use the live chat, or buy something, just give us a call the old-fashioned way. Either way, we'd love to hear from you, and more importantly, we'd love to see you as a customer. I hope this gives you a little bit more info, and I'll speak to you soon. Take care. Bye-bye.