These door stops allow you to adjust them in-place, so you can fine-tune the projection of the door stopper to the perfect length for your door.
Often you will find that a door stop either projects out too far, or worse still, simply isn't long enough to stop the door handles from hitting the wall. With these however, you can adjust the length after you fit it, to accomodate the projection of your door handles or other door hardware, to stop them hitting the wall.
The completeley compressed length of these is 68mm, and the fully extended length is 98mm, meaning you have a 30mm adjustment to play with in order to get just the right length for your application.
As an added bonus to the functionality of these, i'm sure you'll agree, these also look the part, so it's good to see the product doesn't limit itsself to pure functionality and has actually been designed to look good rather than being purely objective!
- Written by Jack
Hi, guys. My name is Darrel and I'm head of the tech team here at Locks Online. Thanks for taking some time to tune in and have a quick look at one of our product review videos. Now we're putting these short little videos together to be able to give you, our customers, the opportunity to see the products that we have to offer in hopefully a little bit more detail, so to speak, than you may get from just an image and hopefully give you the opportunity to show how these products actually work as well and give you a little bit more of a top tip advice.
So today I want to show you a wall-mounted doorstop that we have. It's an adjustable doorstop. The measurements are listed on our site, but the idea of the video is for me to actually show you the product and all its components, etc., and give you an opportunity to show you how it all gets fixed together. Now they're available in three different finishes. This is the silver finish. There's a brass effect finish and a chrome finish as well. And the theory is that this is totally adjustable in and out.
S, the idea would be you'd actually pop this inside here like that. If I just pop that into place, there's a little square peg that sits there. I don't know if you can actually see that there. So that was sit in there like that, and the idea would be that with the screw then you would screw this together with them all together in through there and that would then be fixed onto the wall or the skirting board.
Once that's all secured, and that's obviously going to sit in the centre there then, no problem at all, then you would then take this here then and you'd pop that into there like that and this what allows you then to have the adjustment. So that's about the maximum adjustment there and as I continue to turn my end all the way, you would then be able to make whatever adjustment that you need to ensure your handles, or whatever the reason why you're using the doorstop, don't hit the wall, etc.
The actual design and idea is quite unique in respects to that. So therefore then this video does allow you to actually see how it is actually installed. Now the base diameter there, for your information, in case you need to know that, is around about 35mm base diameter there, so it gives you an idea of what size surface area that you'd be wanting to fix this to, and it comes obviously with a standard screw, which is predominantly designed to screw into wood, but so therefore then you may need a wall plug or some sort of plasterboard fixing, depending on how and what you're going to screw it into. But that's what comes as standard. It also comes with a bit of a rubber bumper on the end here so therefore then reducing the effect of the door slamming it, causing a bit more damage
So there you go, guys, just one of the products that we have on our website. And of course the beauty of the video allows us to show you how it actually gets installed, etc. But listen, if you need a bit more information or advice on this or any of the products that we have, pop us over an email. Use the live chat that we have. Or simply do it the old-fashioned way and pick up the phone and give us a call. Either way, we'd love to hear from you and, more importantly, we'd love to see you as one of our customers. So from me, Darrel, and all of us on the team, thanks for taking the time to tune in and I hope to catch up with you real soon. Take care now. Bye-bye.