|
Switching actuator
• For switching lights, controlling a door opener on back/side doors or other functions via the door communication bus • Features: Control of a zero-voltage switch contact 230 V/10A via the 2-wire bus The switching actuator can be controlled via: the push buttons “Door” and “Light” on the home station, the call button on the door station, the call button on the home station The switching actuator can be operated in five different operating modes: switching, timer/sec., timer/min., impulse and door opener Impulse function for controlling existing automatic staircase mechanisms Binary input for switching functions via a connected mechanical push button Switching time can be continuously adjusted from 1 s to 10 s or 1 min. to 10 min, depending on the function set The switching actuator is intended to be installed in the sub distribution unit. If this is not possible, use a common surface mounted distributor • Technical data: Power supply: 26 V DC ± 2 V (bus voltage) Zero-voltage relay contact: 10 A at 230 V AC, 2 A at 30 V DC Number of teachable call buttons: max. 16 Dimensions: DRA device with 2 modules Temperature range: -5º C to ±45º C
|