Radio control unit 1-10V

• Surface mounted
• Fixed connection cable for easy installation
• Enables switching and dimming of fluorescent lamps via electronic ballast or electronic transformer with standardised 1-10V interfaces
• On/Off function at device, dim function via respective radio transmitter
• Features:
Desired brightness value can be saved (memory function)
Up to 30 radio channels can be assigned
When a radio controlled observer telegram is received the switching actuator switches on for a delay period of approx. 1 minute
The radio control unit can be integrated into up to 5 light scenes; they are called up or saved with the corresponding radio transmitters (e.g. Comfort remote control shown in Related Products)
Automatic assignment of an existing All ON or All OFF button
Light control can be carried out with a radio presence detector (shown in Related Products)
• Technical specification:
- Dimensions (length x width x height): 187 x 28 x 28 mm
- Power supply: 230V AC, 50 Hz
- Control voltage: 1-10V
- Control current: Max. 15mA
- Electrical isolation 1-10V: 2 kV base insulation
- Connected load Ohmic load: max. 1800 W
- Electronic ballast, transformer: type dependent
- Reception frequency: 433.42 MHz
- Temperature range: 0ºC to +55ºC
• Note: A combination of radio presence detectors and radio observers (shown in Related Products) cannot be assigned