KG-S door seal

• Suitable for retrofitting on glass doors
• Unilateral release with parallel drop-down and automatic compensation in case of an inclined floor. Including covering plate on lock side (for double wing/folding doors). Comprises protection profile, seal profile and covering plate on lock side (for double wing/folding doors).

• Main features
Lift height 16 mm
To be fixed with UV cement or double adhesive tape, not supplied
Planet drop-down seal cemented in the S protection profile
Planet KG-S with UV cement on lower glass edge (building side)
Unilateral release with parallel drop-down
Automatic compensation to inclined floors
Acoustic isolation of 48dB (at 7 mm clearance from door to floor)
Can be shortened by 125 mm maximum
High-grade silicone lip, simple lift height adjustment

• Technical specification
Protection profile material: Aluminium, 16.5 x 35 mm, colourless EV1 anodised matt finish
Seal profile: High-grade silicone or high-grade self-extinguishing silicone
Seal height: Up to 16 mm
Sound absorption value: 48dB at 7 mm clearance from door to flor 46dB at 14 mm clearance from door to floor
Lift height adjustment: On the release knob with an Allen key 3 mm
Special lengths available on request up to 2000 mm, sliding doors up to 1600 mm
Release: Unilaterally on hinge side
Can be shortened: Up to 125 mm
• Stoppig plate is needed when glass doors are used with timber frames - stainless steel, 20 x 20 mm, must be ordered separately