- 230V
- Self-adhesive pad, fits behind most mirrors
- Wire into lighting circuit or dedicated switch to suit electrical scheme
- For use in new homes, hotels, hospitals, leisure centres, caravans, mobile homes and many other areas
- For new build or refurbishment projects
- Low surface temperature
- Connections must be made by a qualified electrician
- Carbon film technology
- Economical to run
- Maintenance free
- Approved to UK and International standards
Demista™ pioneered the concept of steam free bathroom mirrors over 18 years ago. Approved to international standards, it is developed and manufactured in the UK.
Demista™ Heated Mirror Pads are installed in many market sectors including hotels and housing projects world-wide. Easy to fit the system is ideal for the DIY market.
Frequently Asked Questions
Can demista™ be cut?
No. This will damage the insulation rendering it dangerous.
How much of the mirror should demista™ cover?
This depends on what area is required to be clear. The area of the mirror that will remain steam free is the area of the demista™ Pad plus approximately 20%-30% area around it.
Can demista™ be used with safety backed mirrors?
Yes but the backing should be earthed as should all metal parts surrounding the mirror.
Is a transformer required?
Only with low volt models.
Can more than 1 demista™ be fitted to a mirror?
Yes, within the limitations of the available power. They should then be fitted in parallel.
What adhesive should be used to bond the mirror to the wall?
Any solvent free.
Can the mirror adhesive be applied across demista™?
Yes.
Can demista™ be used with a dimmer switch?
This is not advisable as when turned down there would be insufficient power for demista™ to be fully effective.
What thickness of mirror can be used?
As glass is a good conductor of heat demista™ is suitable for use with any normal thickness of mirror.
