Colour day/night camera for door station, flush mounted

• Additional insert module for flush mounted door stations, TX-44 cover frame to be ordered separately, shown in Don't Forget to Order
• For installation in flush mounted wall box, shown in Don't Forget to Order
• Power supply: 2 cameras via system bus, if 3rd camera required an additional power supply item 912.08.900 is required, shown in Don't Forget to Order
• Connections: 2 system bus plug strips, 1 video plug strip
• Consists of:
- Camera insert
- Camera top unit
- 6-pole audio connection cable
- 2-pole video connection cable.
• Features:
- Automatic day/night switching - switches from daytime operation (colour presentation) to night mode (black and white presentation) and back again at a defined ambient brightness
- LEDs provide steady illumination for the field of view in night mode
- Automatic background lighting compensation, white balance and gain control (AGC)
- Note: The colour camera may not be positioned directly below a light
- Signal transmission and supply of the audio and video components via reverse-polarity protected, short-circuit-proof 2-wire bus
- Camera can be swivelled 20º horizontally and vertically by hand
- With wide-angle lens
- 140º visible detection range (includes 20º swivelling)
- PAL colour system
- 500 (H) x 582 (V) pixels
- 380 TVlines horizontal resolution
- Recommended camera installation height 1.50 m
- Integrated temperature-dependent camera heating
- Temperature range: -20ºC to +50ºC
- Splash-water sealed cover plate
• Impact-resistant plastic camera cover plate