From £9.67 exc. VAT
(£11.60 inc. VAT)
|
• With compression pad
• For applying edge lippings, such as laminate or solid timber mouldings
• Applies edge lippings...
|
|
From £9.95 exc. VAT
(£11.94 inc. VAT)
|
• With profiled steel rails and tempered cast tensioning arms
• Colour may vary on the clamp from red to...
|
|
From £16.67 exc. VAT
(£20.00 inc. VAT)
|
• Hardened and tempered, very easy to use and lighter than casted clamps
• Colour may vary on the clamp from red to...
|
|
From £15.08 exc. VAT
(£18.10 inc. VAT)
|
• Adjustable grippers/steel straps
• Adjustable to 20-44 mm
• Steel clamps, simple adjustment
• Clamps door...
|
|
From £40.74 exc. VAT
(£48.89 inc. VAT)
|
• Capacity 7 m/23 ft
• Strap width: 25 mm
• Angle 60º -...
|
|
From £23.97 exc. VAT
(£28.76 inc. VAT)
|
• For one handed clamping and spreading. Switch from opening to spreading with the turn of a dial
• Pump handle parallel to jaws
|
|
From £60.10 exc. VAT
(£72.12 inc. VAT)
|
• One-handed edge clamp
• Permits rapid, one-handed operation
• Opening: 10 - 55 mm
• Depth: 0 - 45...
|
|
From £29.60 exc. VAT
(£35.52 inc. VAT)
|
• For laying laminate floors
• Opening 4000 mm
• Capacity width 120...
|
|
From £82.84 exc. VAT
(£99.41 inc. VAT)
|
• Bar dimensions 40 x 40 x 50 mm
• Jaw dimensions 66 x 43 mm
• Locking bar and Tommy bar...
|
|
From £22.75 exc. VAT
(£27.30 inc. VAT)
|
• Lightweight and easy to use
• Good clamping pressure quickly applied through use of lever ratchet
• Opening: 200 or 250...
|
|
From £8.55 exc. VAT
(£10.26 inc. VAT)
|
• Non-slip mechanism
• Clamping pressures up to 7000 Nm
• Large area fixed and sliding jaws
• Entire reach can...
|
|
From £2.86 exc. VAT
(£3.43 inc. VAT)
|
• Opening: 35, 50 or 75 mm
• Depth: 37, 50 or 70...
|
|
From £6.77 exc. VAT
(£8.12 inc. VAT)
|
• Opening: 55/100 mm
• Depth: 37/50...
|
|
From £21.90 exc. VAT
(£26.28 inc. VAT)
|
• A smaller lighter duty clamp designed to compliment the K-Body series - please see Similar Products above
• Removable head...
|
|
From £81.11 exc. VAT
(£97.33 inc. VAT)
|
• A sturdy forged clamp to glue edges, corners and edge binding strips
• Projection: 80 mm
• Opening width: 80 mm
|
|
From £11.53 exc. VAT
(£13.84 inc. VAT)
|
• A supplementary tool which, when clamped to the profile rails of adjustable clamps, helps to solve special clamping problems, such as...
|
|
From £224.48 exc. VAT
(£269.38 inc. VAT)
|
• For 90° panel connection
• Holds panels between 15 and 27 mm in place whilst the carcase is assembled
• Light...
|
|
From £200.82 exc. VAT
(£240.98 inc. VAT)
|
• Set includes:
- 4x 003.72.047 K-body clamps
- 6x 003.75.120 spring...
|
|
From £10.66 exc. VAT
(£12.79 inc. VAT)
|
• Self-adjusts to any size carcase panel
• Suitable for use on timber surface, welding, sheet metal etc.
• Pressure screw...
|
|
From £14.52 exc. VAT
(£17.42 inc. VAT)
|
• Quick adjustment with gun-type operation and immediate release
• No damage to clamped materials due to soft plastic pads
|
|
From £1.64 exc. VAT
(£1.97 inc. VAT)
|
• For use as a holding mechanism for parts with at least one flat side, while using a router, sander, circular saw or jigsaw
•...
|
| |
