From £22.38 exc. VAT
(£26.86 inc. VAT)
|
• Drilling tool fits exactly in insert without allowing drill bit to touch jig
• Provides a self centreing bore
• Design...
|
|
From £19.84 exc. VAT
(£23.81 inc. VAT)
|
• For drilling jig 001.33.400 (shown in Related Products)
• 3 x bushes included
•...
|
|
From £104.92 exc. VAT
(£125.90 inc. VAT)
|
• With centering tip
• Drill bit Ø 20 mm
• Shank Ø 10 mm, length 139...
|
|
From £79.95 exc. VAT
(£95.94 inc. VAT)
|
• With centering tip
• For Ø 12 or Ø 15 mm housing holes
• Shank Ø 10 mm, length 139...
|
|
From £105.82 exc. VAT
(£126.98 inc. VAT)
|
• With centering tip
• Bit Ø 18 mm
• Shank Ø 10 mm
• Length 139...
|
|
From £14.78 exc. VAT
(£17.74 inc. VAT)
|
• For use with wood
• Special alloy tool...
|
|
From £19.82 exc. VAT
(£23.78 inc. VAT)
|
• With 2 ball bearings, stop ring, spiral spring and allen key for drill-bits with a Ø 5 mm shaft
•...
|
|
From £24.45 exc. VAT
(£29.34 inc. VAT)
|
• With stop ring and allen key for drill bits with Ø 10 mm shank and bit diameters up to max. 20 mm
• Galvanised steel with 2...
|
|
From £24.95 exc. VAT
(£29.94 inc. VAT)
|
• For use with Elecdrill 32 V (now...
|
|
From £11.47 exc. VAT
(£13.76 inc. VAT)
|
• For use with Unitool Multi drilling jig shown in Related Products
• Drilling for the connectors TAB and...
|
|
From £15.73 exc. VAT
(£18.88 inc. VAT)
|
• For use with Unitool Multi drilling jig shown in Related Products
• Drilling for the connectors Rafix, Pushfix, Onefix and...
|
|
From £11.10 exc. VAT
(£13.32 inc. VAT)
|
• For use with Unitool Multi drilling jig shown in Related...
|
|
From £11.47 exc. VAT
(£13.76 inc. VAT)
|
• For use with Unitool Multi drilling jig shown in Related...
|
|
From £8.90 exc. VAT
(£10.68 inc. VAT)
|
• For use with Unitool Multi drilling jig shown in Related...
|
|
From £14.07 exc. VAT
(£16.88 inc. VAT)
|
• For use with Unitool Multi drilling jig shown in Related...
|
|
From £3.42 exc. VAT
(£4.10 inc. VAT)
|
• For Ø 5 mm bolt hole
• For insertion into Ø 8 mm drilling...
|
|
From £12.60 exc. VAT
(£15.12 inc. VAT)
|
• With clamping...
|
|
From £0.89 exc. VAT
(£1.07 inc. VAT)
|
• Steel
• consists of 6 grub...
|
|
From £31.84 exc. VAT
(£38.21 inc. VAT)
|
• Drill bit with hex shank 10 mm, with one flat side for clamping, adjusting screw for re-adjusting the drill bit length after sharpening
|
|
From £112.25 exc. VAT
(£134.70 inc. VAT)
|
• For drill holes close to the lower top layer, without contouring the outer decor surfaces
• Drill bit with hex shank 10 mm, with...
|
|
From £16.51 exc. VAT
(£19.81 inc. VAT)
|
•...
|
|
From £29.77 exc. VAT
(£35.72 inc. VAT)
|
•...
|
|
From £59.29 exc. VAT
(£71.15 inc. VAT)
|
• For use with drilling jig 500 shown in Related Products
• Carbide-tipped
• Ø 12 mm shank
• For...
|
|
From £123.92 exc. VAT
(£148.70 inc. VAT)
|
• Locating rule with 800 mm double-ended...
|
|
From £12.44 exc. VAT
(£14.93 inc. VAT)
|
• Converts standard housing down to smaller bore for long drill, see Related Products
• To drill through full width of door...
|
|
From £33.77 exc. VAT
(£40.52 inc. VAT)
|
• For Ø 15 mm housing holes
• Comprising:
- Guide pin with two pointed stops
- Marking jig with locating hole to...
|
|
From £11.03 exc. VAT
(£13.24 inc. VAT)
|
• Screws into-end stops shown in Related...
|
|
From £9.79 exc. VAT
(£11.75 inc. VAT)
|
• New screw-on shaft design
• For replacement shaft for standard and offset jigs, shown in Related Products, use 220 mm...
|
|
From £3.64 exc. VAT
(£4.37 inc. VAT)
|
• Fits standard shaft and long shaft only
•...
|
|
From £1.30 exc. VAT
(£1.56 inc. VAT)
|
• Set screw with hexagonal...
|
|
From £0.92 exc. VAT
(£1.10 inc. VAT)
|
• 5 drill bits are supplied
• For use with metal
• High speed steel...
|
|
|
From £2.30 exc. VAT
(£2.76 inc. VAT)
|
• 3 drill bits are supplied
• For use with metal
• High speed steel...
|
|
From £99.84 exc. VAT
(£119.81 inc. VAT)
|
• With adjustable stop...
|
|
From £92.62 exc. VAT
(£111.14 inc. VAT)
|
• With adjustable stop...
|
|
From £91.36 exc. VAT
(£109.63 inc. VAT)
|
• With adjustable stop...
|
|
From £63.08 exc. VAT
(£75.70 inc. VAT)
|
• With adjustable stop...
|
|
From £12.70 exc. VAT
(£15.24 inc. VAT)
|
• Medium bage: 1010 x 430 x 26 mm
• Large bag: 1220 x 430 x 26 mm
• To be used with worktop jigs
- 002.13.565...
|
| |
