
From £6.33 exc. VAT (£7.44 inc. VAT)
|
• For insertion in groove • Can be lacquered with polyurethane based paint • Light grey plastic • A minimum...
|
|

From £0.12 exc. VAT (£0.14 inc. VAT)
|
• M4 with combination slot for end assembly by screw-mounting in upright profile • For use with Rafix housings •...
|
|

From £0.22 exc. VAT (£0.26 inc. VAT)
|
• For end assembly by screw-mounting in upright profile • For use with Minifix housings • Galvanised...
|
|

From £4.97 exc. VAT (£5.84 inc. VAT)
|
• For insertion in the upright profile with adjustable spindle and pressure plate • For securing room height cabinets to the...
|
|

From £14.55 exc. VAT (£17.10 inc. VAT)
|
• For mounting in grooves in visible side panels with a thickness of 19 mm • Silver anodised...
|
|

From £9.33 exc. VAT (£10.96 inc. VAT)
|
• With pre-mounted Rafix knock-down fittings which can be clamped on both sides of the upright profile • The cross is as the upright...
|
|

From £0.18 exc. VAT (£0.21 inc. VAT)
|
• M4 with combination slot for double-sided installation by screw-mounting in upright profile • For use with Rafix housings
|
|

From £2.90 exc. VAT (£3.41 inc. VAT)
|
• For press-fitting onto upright or cross profiles • Can accept rear panels up to 5 mm thick • Soft/hard grey...
|
|

From £0.18 exc. VAT (£0.21 inc. VAT)
|
• With mounting plate and screw hole for assembly on the upright or cross profile • Can be used for turning espagnolette locks (as...
|
|

From £0.37 exc. VAT (£0.43 inc. VAT)
|
• With plug and screw hole for mounting in upright profiles • Should always be used if rear panels are visible •...
|
|

From £5.58 exc. VAT (£6.56 inc. VAT)
|
• For press-fit in upright or cross profiles, optionally for 5 mm rear panel thickness • Allows butt mounting of rear panel
|
|

From £3.53 exc. VAT (£4.15 inc. VAT)
|
• For press fitting onto shelves and uprights • Soft/hard...
|
|

From £0.15 exc. VAT (£0.18 inc. VAT)
|
• With screw hole for insertion in upright profiles • Nickel-plated zinc...
|
|

From £0.15 exc. VAT (£0.18 inc. VAT)
|
• With safety plug for insertion in upright profiles • Nickel-plated zinc...
|
|

From £6.67 exc. VAT (£7.84 inc. VAT)
|
• With visible axle • End mounting onto the upright profile. An integral part of the system offering simple mounting of doors
|
|

From £6.82 exc. VAT (£8.01 inc. VAT)
|
• With visible axle • End mounting onto the upright profile. An integral part of the system offering simple mounting of doors
|
|

From £10.97 exc. VAT (£12.89 inc. VAT)
|
• With visible axle • Single mounting onto the upright profile • 180° door opening angle • Accurate and...
|
|

From £10.43 exc. VAT (£12.26 inc. VAT)
|
• With visible axle • Single mounting onto the upright profile • 180° door opening angle • Accurate and...
|
|

From £19.80 exc. VAT (£23.27 inc. VAT)
|
• ASP system is designed for the production of cabinet dividing walls. • The upright profiles instead of the wall material...
|
|

From £1.17 exc. VAT (£1.37 inc. VAT)
|
• With foot plate • Galvanised zinc...
|
|

From £0.55 exc. VAT (£0.65 inc. VAT)
|
• Plinth and panel clip can be press fitted into either an aluminium plinth panel or panel made of board material (2.5 mm groove). When using...
|
|

From £13.70 exc. VAT (£16.10 inc. VAT)
|
• Lugs at the ends of the bars, slot into the end rails • Epoxy coated...
|
|

From £2.13 exc. VAT (£2.50 inc. VAT)
|
• Cylinder head with cross slots PZ 2 • Nickel-plated...
|
| |